Logicpic.com

Cake Drums, Boards, & Support Systems

Polystyrene Foam Core board with High Impact Solid Polystyrene

White Matte covering on both sides.

Home Page

Notice! Due to our current production schedule orders received after Wed June 25^th will not ship until after July 8^th.  

Sorry NO Exceptions.

Firefox Browser has a problem displaying our long pages. Please use MS Internet Explorer.

PayPal Notice     New Page Navigation Info

Top of Page

Elite White Boards

Logicpic  Cake Drums,  and Cake Boards,  and Separator Plates 3/16" and 1/2" thick are made from High Density Elite Polystyrene  Foam Core Board, with Solid Polystyrene White Matte covering on both sides. 

The Elite Board is Strong, Light Weight, Clean, Washable, Waterproof, and can be Sanitized.

Std. SIZE is Same size as the Nominal Cake dimensions.

Plus Size is 3/16" Larger diameter,  or width,  and depth than the Nominal Cake dimensions for Thicker Icing and or Fondant.

Our Cake Drums, and Cake Boards, are an ideal replacement for Acrylic Cake Boards, Cardboard Cake boards, Cardboard Cake plates, or Foam Cake Boards. Ribbons of all colors and textures can be easily attached to the edge of the boards using non toxic stick glue.

Elite White Separator Plates

Logicpic  Separator Plates are  made with our Elite Foam Core Board.  The Separator Plate has a hole in the center for perfect cake centering  over our center stabilizer rod when using our Cake Support System.

Sealed Wood and Acrylic Dowel rods for Legs and Center Stabilizer rod.

We Seal our Maple wooden dowel rods to keep them from absorbing moister or oils from the cake and to prevent them from swelling and or warping. We also provide clear Acrylic dowel rods for the applications where wooden rods wound be visible.

 Elite White Support System Base Boards

Attached to the bottom of any 1/2 Thick Elite board is a 1/2" thick Solid Polystyrene Center Support Rod Holder (Hub). The Elite Board and Solid Polystyrene hub are Drilled with a 3/8" hole in the center to hold your 3/8" Center Support Rod. The center Support Rod is driven into the Center Support Hub and will stand straight up, it will keep all additional layers in line.  They also have (4 ) - 1/2 high Round leg's Attached to the bottom so you can get your fingers under the board to move the cake, it also raises the cake to make it look somewhat higher. Improving presentation.

Any Shape, and Size of our 1/2 thick Drums can be made into a Support Base Board  or Cupcake Baseboard.

Top of Page

Cupcake Stand Baseboard

Is a modified version of our Support System Baseboard. For the Cupcake Stand we thread the center hub with a 3/8-16 thread to allow the cup cake risers to screw into them.

Cupcake Risers and Cupcake toppers

Cupcake Riser is 2 3/8" Diameter riser that is 5 1/2" tall with a 3/8 threaded hole on one end and a 3/8" nylon stud on the other, this allows you use any combination of our separator boards to build your Cupcake Stand.

The Cupcake Topper is 2" tall and has a 3" round top to hold one cupcake at the top.

Just Email us your requirements.

E-Mail US

Support Systems Frames, Hexagon in shape to support all shape boards

Logicpic Cake Support Systems are made from High Impact Polystyrene, with Leg receivers and a center hole  to center and stabilize each tier and hold support legs straight and strong.  Ideal for of support and pre assembly of wedding cakes, and multi tier cakes.

The Elite Boards and Drums are ideal for all cake decorating,  cake art, sugar art, wedding cakes, multi tier cakes, and other creative art and home hobby projects.

Many shapes are available, Comma, Convex Triangle, Corner Cut, Half Round, Heart, Hexagon, Octagon, Oval, Petal 5,6,8 Lobe, Rectangle, Round, Square, Teardrop, Oblong , Our shapes are cut to fit the shapes of the Wilton©® and Fat Daddio's©® pan sets.

Any Custom Shape Board , or custom tools to assist the  Bakery and or baking  arts you need will be considered and quoted.  All our Products, and Major Materials are American Made.

Top of Page

Return to home page for all instructions and specifications links

E-Mail US

Top of Page

Logicpic

11824 Yarnell Rd.

Knoxville, TN 37932

(865) 691-6333 Fax (865) 691-6363

We are glad to answer all questions by phone.

We currently do not take orders over the phone, as our only clearing house for Credit Card Payment is thru Web based Paypal.

We are focused on manufacturing,  and not sales, we have always believed that if you provide what the customer wants, and needs the sales will take care of themselves.

You will get faster service by sending us an e-mail with your questions, and a phone number and time that we can return your call if needed. Most incoming phone calls go directly to Voice Mail.

We can receive Special Orders, or orders for products that are not on the Internet yet by E-Mail and then send you a E-Mail Quotation/Invoice, that may be paid by Paypal, or by Check.

All E-mail orders will require your Name and Shipping Address, so Freight, and or Tax can be calculated, and an Invoice created.

Mail in orders with company check will be accepted, we suggest you select the products you want from the web pages,  and print the shopping cart Invoice page after shipping and tax has been calculated for the order blank. Include your Shipping address and company check.

Top of Page