|
Top of Page
Elite White Boards
Logicpic Cake Drums, and Cake Boards, and Separator Plates 3/16" and 1/2" thick are made from
High Density Elite Polystyrene
Foam Core Board,
with Solid Polystyrene White Matte covering on both sides.
The Elite Board is Strong, Light Weight, Clean, Washable, Waterproof, and can be Sanitized.
Std.
SIZE is Same size as the Nominal Cake
dimensions.
Plus Size is 3/16" Larger diameter, or width, and depth than
the Nominal Cake dimensions for Thicker Icing and or Fondant. Our Cake Drums, and Cake Boards, are
an ideal replacement for Acrylic Cake Boards, Cardboard Cake boards, Cardboard Cake plates, or Foam Cake Boards. Ribbons of all colors and textures can be easily attached to the edge of the boards using non toxic stick glue.
Elite White Separator Plates
Logicpic Separator Plates are made with
our Elite
Foam Core Board. The Separator Plate has a hole in the center for perfect cake centering over our center stabilizer rod when using our Cake Support System.
Sealed Wood and Acrylic Dowel rods for Legs and Center Stabilizer rod.
We Seal our Maple wooden dowel rods to keep them from absorbing moister or oils from the cake and to prevent them from swelling and or warping. We also provide clear Acrylic dowel rods for the applications where wooden rods wound be visible.
Elite White Support System Base Boards
Attached to the bottom of any 1/2 Thick Elite board is a 1/2" thick Solid
Polystyrene Center Support Rod Holder (Hub). The Elite Board and Solid
Polystyrene hub are Drilled with a 3/8" hole in the center to hold your
3/8" Center Support Rod. The center Support Rod is driven into the
Center Support Hub and will stand straight up, it will keep all
additional layers in line. They also have (4 ) -
1/2 high Round leg's Attached to the bottom so you can get your fingers
under the board to move the cake, it also raises the cake to make it look
somewhat higher. Improving presentation.
Any Shape, and Size of our 1/2 thick Drums can be made into a Support Base Board or Cupcake Baseboard.
Top of Page
Cupcake Stand Baseboard
Is a modified version of our Support System Baseboard. For the Cupcake Stand we thread the center hub with a 3/8-16 thread to allow the cup cake risers to screw into them.
Cupcake Risers and Cupcake toppers
Cupcake Riser is 2 3/8" Diameter riser that is 5 1/2" tall with a 3/8 threaded hole on one end and a 3/8" nylon stud on the other, this allows you use any combination of our separator boards to build your Cupcake Stand.
The Cupcake Topper is 2" tall and has a 3" round top to hold one cupcake at the top.
Just Email us your requirements.
E-Mail US
Support Systems Frames, Hexagon in shape to support all shape boards
Logicpic Cake Support
Systems are made from
High Impact Polystyrene, with Leg receivers and a center hole to center and stabilize each tier and hold support legs straight and strong. Ideal for of support and pre assembly of wedding cakes, and multi tier cakes.
The Elite Boards and Drums are ideal for all cake decorating, cake art, sugar art, wedding cakes, multi tier cakes, and other creative art and home hobby projects.
Many shapes are available, Comma, Convex Triangle, Corner Cut, Half Round, Heart, Hexagon, Octagon, Oval, Petal 5,6,8 Lobe, Rectangle, Round, Square, Teardrop, Oblong , Our shapes are cut to fit the shapes of the Wilton©® and Fat Daddio's©® pan sets.
Any Custom Shape Board , or custom tools to assist the Bakery and or baking arts you need will be considered and quoted. All our Products, and Major Materials are American Made.
Top of Page
Return to home page for all instructions and specifications links
E-Mail US
Top of Page
Logicpic
11824 Yarnell Rd.
Knoxville, TN 37932
(865) 691-6333 Fax (865) 691-6363
We are glad to answer all questions by phone.
We
currently do not take orders over the phone, as our
only clearing house for Credit Card Payment is thru Web based Paypal.
We are
focused on manufacturing, and not sales, we have always believed that if
you provide what the customer wants, and needs the sales will take care of
themselves.
You
will get faster service by sending us an e-mail with your questions, and a phone
number and time that we can return your call if needed. Most incoming phone calls go
directly to Voice Mail.
We can
receive Special Orders, or orders for products that are not on the Internet yet
by E-Mail and then send you a E-Mail Quotation/Invoice, that may be paid by
Paypal, or by Check.
All
E-mail orders will require your Name and Shipping Address, so Freight, and or
Tax can be calculated, and an Invoice created.
Mail in
orders with company check will be accepted, we suggest you select the products
you want from the web pages, and print the shopping cart Invoice page
after shipping and tax has been calculated for the order blank. Include your
Shipping address and company check.
Top of Page
| 
![images/us[1].gif](images/us[1].gif)
Proudly Made in the U.S.A.